New: milled MDF facades — 6 new designs

A frame facade with a wide 60 mm bevel that gently slopes down to a recessed panel. At the panel edge a narrow double groove separates the bevel from the panel and draws a crisp, graphic line. The frame corners meet at 45°, so the bevel runs around the whole door without a break. Calm, yet with depth: the light on the bevel changes throughout the day.

Profile:

• 5 mm edge, R2 rounded
• 60 mm bevel, 10 mm drop (≈9.5°)
• Double groove at the panel: 4 + 3 + 4 mm, 3 mm deep
• Panel recessed by 10 mm
• 22 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks

A classic frame facade with a calm, wide pattern. An 8 mm edge, then a 50 mm recessed frame groove, a narrow bead and a bevel down to the recessed panel. The profile takes 74 mm from the edge — the frame reads clearly even from a distance without overloading the room. Suits neoclassical kitchens, walk-in wardrobes and bathrooms.

Profile:

• 8 mm edge
• 50 mm frame groove, 3 mm deep
• 8 mm bead
• 8 mm bevel to the panel, 6 mm drop
• R1 edges all round
• 22 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks

A modern frame facade with a very fine edge profile: a 5 mm edge, a narrow 3×3 mm groove, another 5 mm band and a 4 mm step down to a flat panel. The profile takes only 13 mm, so the door looks almost flat but with a clean, graphic outline. Suits minimalist interiors — kitchens, wardrobes and bathrooms.

Profile:

• 5 mm edge
• 3 mm groove, 3 mm deep
• 5 mm band
• 4 mm step to the panel (18 mm left)
• Profile width 13 mm from the edge
• 22 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks

A fluted facade with a soft, rhythmic pattern along the full height. Every 27 mm a narrow 3×3 mm groove between two 4 mm lands repeats with a wide 16 mm concave flute of radius R9. Soft shadows settle in the flutes, so the surface changes with the light — especially in the evening. The pattern is always vertical and centred across the door width. Great for bathroom vanities, kitchens and wall panels.

Profile:

• 27 mm pitch
• 4 mm land
• 3 mm groove, 3 mm deep
• 16 mm concave flute, R9, 4.9 mm deep
• Vertical pattern centred across the width
• 22 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks

A frame facade with a calm, wide 50 mm frame and a fine stepped transition to the panel: five 5 mm steps, each 1 mm deeper. Every step casts a thin line of shadow, so the frame looks graphic and deep without heavy milling. Suits both modern and classic kitchens, wardrobes and bathrooms.

Profile:

• Flat 50 mm frame
• Five 5 mm steps, each 1 mm deeper
• Panel recessed by 5 mm
• Profile width 70 mm from the edge
• R1 edges
• 22 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks

A classic pattern in a simple, clean form: a wide flat 80 mm frame, a fine 1 mm step and a milled 40 mm groove with 45° bevels. The panel is flush with the frame, so the door looks light while the shadowed groove clearly outlines the frame. 18 mm MDF, R2 edges, painted in your NCS colour, matt.

Profile:

• 80 mm frame
• 1 mm step, 45° bevel 4×4
• 40 mm groove, 5 mm deep
• Thinnest point 13 mm
• R2 edges all round
• 18 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks

A slatted facade in a clean, graphic form: wide 14 mm strips alternate with square 10 mm grooves, 4 mm deep, on a 24 mm pitch. The flat-bottomed grooves cast crisp, even shadows, so the surface reads as a calm rhythm of vertical lines in daylight and becomes deeper and more contrasting under evening light. Works well on kitchen fronts, wardrobes, wall panels and bathroom vanities.

Profile:

• 14 mm strip, 10 mm groove
• Groove depth 4 mm, flat bottom
• 24 mm pitch, vertical along the full height
• Pattern centred across the width
• R2 edges
• 22 mm MDF, painted NCS, matt
• Lead time: 4–5 weeks