Milled MDF facades
made to our own drawings
Milling gives a plain MDF board its character: a frame, a bevel, grooves or a rhythmic pattern. We design every profile ourselves — from the drawing to the CNC program — and test each new milling on a sample first, so the shadows and proportions look exactly as intended.
All milled facades are made of 22 mm MDF and painted in any NCS colour, matt. They suit kitchens, wardrobes, bathroom furniture and wall panels. Ready and custom sizes can be ordered in our online shop rigasmebeles.shop, which also has a calculator.
Our millings
01
Frame-ANGL-60
A frame facade with a wide 60 mm bevel that gently slopes down to a recessed panel. At the panel edge a narrow double groove separates the bevel from the panel and draws a crisp, graphic line. The frame corners meet at 45°, so the bevel runs around the whole door without a break. Calm, yet with depth: the light on the bevel changes throughout the day.
Profile:
- 5 mm edge, R2 rounded
- 60 mm bevel, 10 mm drop (≈9.5°)
- Double groove at the panel: 4 + 3 + 4 mm, 3 mm deep
- Panel recessed by 10 mm
- 22 mm MDF, painted NCS, matt
- Lead time: 4–5 weeks
KPR 50
A classic frame facade with a calm, wide pattern. An 8 mm edge, then a 50 mm recessed frame groove, a narrow bead and a bevel down to the recessed panel. The profile takes 74 mm from the edge — the frame reads clearly even from a distance without overloading the room. Suits neoclassical kitchens, walk-in wardrobes and bathrooms.
Profile:
- 8 mm edge
- 50 mm frame groove, 3 mm deep
- 8 mm bead
- 8 mm bevel to the panel, 6 mm drop
- R1 edges all round
- 22 mm MDF, painted NCS, matt
- Lead time: 4–5 weeks
02
03
DAVI 5×3×5
A modern frame facade with a very fine edge profile: a 5 mm edge, a narrow 3×3 mm groove, another 5 mm band and a 4 mm step down to a flat panel. The profile takes only 13 mm, so the door looks almost flat but with a clean, graphic outline. Suits minimalist interiors — kitchens, wardrobes and bathrooms.
Profile:
- 5 mm edge
- 3 mm groove, 3 mm deep
- 5 mm band
- 4 mm step to the panel (18 mm left)
- Profile width 13 mm from the edge
- 22 mm MDF, painted NCS, matt
- Lead time: 4–5 weeks
OLN 11×16
A fluted facade with a soft, rhythmic pattern along the full height. Every 27 mm a narrow 3×3 mm groove between two 4 mm lands repeats with a wide 16 mm concave flute of radius R9. Soft shadows settle in the flutes, so the surface changes with the light — especially in the evening. The pattern is always vertical and centred across the door width. Great for bathroom vanities, kitchens and wall panels.
Profile:
- 27 mm pitch
- 4 mm land
- 3 mm groove, 3 mm deep
- 16 mm concave flute, R9, 4.9 mm deep
- Vertical pattern centred across the width
- 22 mm MDF, painted NCS, matt
- Lead time: 4–5 weeks
04
05
Type 2
A frame facade with a calm, wide 50 mm frame and a fine stepped transition to the panel: five 5 mm steps, each 1 mm deeper. Every step casts a thin line of shadow, so the frame looks graphic and deep without heavy milling. Suits both modern and classic kitchens, wardrobes and bathrooms.
Profile:
- Flat 50 mm frame
- Five 5 mm steps, each 1 mm deeper
- Panel recessed by 5 mm
- Profile width 70 mm from the edge
- R1 edges
- 22 mm MDF, painted NCS, matt
- Lead time: 4–5 weeks
